View LO5SMTYL4-B0G-A_1266703.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) 5-mm Oval LED
Model # LO5SMTYL4-B0G-A Data Sheet
110-degree oval LED lamp in amber color with tinted, diffused lens and stopper
Applications
* * Single-Color Display Indicators
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 50 200 5 130 -40 ~ +95 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle Symbol VF IR D IV 21/2H-H 21/2V-V Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Unit V A nm mcd deg deg 584 390 591 600 110 50 Minimum Typical 2.3 Maximum 2.6 100 596
D-CT112.000 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LO5SMTYL4-B0G-A (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LO5SMTYL4-B0G-A may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 20 mA.
Luminous Intensity (IV)
T or above 1100 mcd S 770 mcd R 550 mcd Q 390 mcd 584 nm 596 nm Dominant Wavelength (D)
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT2.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Model No. Doc. No.
LO5SMTYL4-B0G-A 03 07Sep04
Graphs
If (mA)
-60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0
100.0 80.0 60.0 40.0 20.0
0.0 2.0 2.6 2.8 3.0 2.2 2.4 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Vf(V)
Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE.
-50.0
Half Power WL=20nm Domi WL= 591nm I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% 0% 300 400 WL(nm) 800
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT.
500
600
700
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
50% Power Angle :
100 80 60 40 20 0 Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0
-90 -60 -30 0 30
IF(mA)
H-H : 110 V-V : 50 Ie(%)
100%
H-H
V-V
0
80%
60%
40%
20%
60
90
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by ECN#
Signatures
LiuZM MaJF David
Date
2004/09/07 2004/09/07 2004/09/07 DOC. No. B 06May04 03 07Sep04
Revision History
CHANGE DESCRIPTION Change applications.
Add ESD and Notes; Change FIG.1&3&5; Change IV &
D
Rank form.
ECN-H20040218
Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. Obsoletes Doc: B 06May04.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CLD-CT2.000
4/4
COTCO-D-074
REV.1
Mechanical Dimensions
Model No. LO5SMTYL4-B0G-A Doc. No. 07Sep04 All dimensions are in mm. Tolerance is 0.25 mm unless otherwise 03 noted.
An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.
Dimension Drawing
e maximum ating 50 200 5 130 ~ + 95 ~ +100
Unit mA mA V mW
C C
the base of the epoxy bulb)
RoHS Compliance otherwise restricted materials recommended. Please maximum concentration values (also referred to as the between 10mA and 30mA are in this product are below the contact COTCO The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
0C for 3 sec Max. Notes
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment ommended drive conditions. (RoHS), as amended through April 21, 2006.
ics ( Ta = 25C)
Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Condition
Min.
Typ. 2.3
Max. 2.6
Unit V
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Cree logo IF = 20mAare registered trademarks of Cree, Inc. ---
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
4
CLD-CT2.000
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = Bulk pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LO5SMTYL4-B0G-A-00001 LO5SMTYL4-B0G-A-00011 Description 5mm Oval 110 Amber 591nm, FULL RANK, Bulk Pack 5mm Oval 110 Amber 591nm, R or above, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT2.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LO5SMTYL4-B0G-A

	To Download LO5SMTYL4-B0G-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .